Amplificador Hyperlink 1000mW

 

 

232.70€

Cantidad:

Codigo del Producto:HA2401GXI-1000

 

HyperAmp® 2.4 GHz 802.11b and 802.11g (b/g) Compatible Indoor and Outdoor Bi-Directional WiFi Amplifier with Active Power Control

Description
HyperAmp® HA2401G amplifiers are compatible with 802.11g (b/g) and 802.11b only wireless LAN equipment (see chart above for model compatibility). The 802.11g (b/g) models support 108 Mbit/sec "Turbo Mode" radios as well. Hyperlink's Active Power Control circuit automatically adjusts the amplifier's gain to provide a constant output power regardless of cable length.

The HyperAmp® HA2401G series improves range by delivering full transmit power and receive gain directly at the antenna where it is most effective. This gain compensates for cable losses and actually increases the receive sensitivity of most wireless LAN radios. The unit can be configured to deliver the full transmit power with as little as 1 mW of input power, permitting cable runs of several hundred feet with no degradation in operating range.

Streaming Media Ready
WiFi components used in a Streaming Video or Audio system work harder than ones carrying Data only. They are turned on for extended periods of time without the chance to cool off. Microwave devices are very sensitive to the heat generated from operating at high duty cycles. Most amplifiers, or for that matter many Radios, cannot pass Streaming Media content for extended periods of time without overheating. Some products were designed for Data only use and have no method of heatsinking. If you use them in a Streaming Media system, those products will self destruct or have their lifespan diminished. It would be the equivalent removing the Heatsink or Fans from your PC.

Hyperlink Technologies "Streaming Media Ready" amplifiers (see chart above for models) were designed from the start to survive the extreme conditions that Streaming Media imposes on an amplifier. Using proprietary heatsinking techniques, Hyperlink's Streaming Media amplifiers will remain at a safe operating temperatures for the most demanding Streaming Media applications, without the need for cumbersome heatsink plates, fins or fans.

Indoor Models
Designed to be installed indoors or in weather-resistant enclosures such as the HyperLink NEMA enclosure, the "GI" and "GXI" series feature rugged cast aluminum housings with integral mounting tabs. The staggered mounting feet allow multiple amplifiers to positioned next to each other with minimal wasted space. The indoor series amplifiers include a Power Supply.

Features
12VDC Power Supply Included
Outdoor Models Include DC Injector and Mast-Mount Hardware
Receive Bandpass Filter
Standard Models: 100 mw to 2 Watt
IEEE 802.11g (b/g) and 802.11b Only Compatible (see chart below)
802.11g (b/g) models supports 108 Mbit/sec "Turbo Mode" data rates
Streaming Media Ready Models (see chart below)
Cast Aluminum Construction
N-Female Connectors (RP-TNC connectors available by special order)
Durable UV-Stable Finish
Transmit and Receive LEDs
1 Year Limited Warranty
802.11b/g and 802.11b certified kits available

General Specifications (All Models)
Frequency 2400 - 2500 MHz
Max. Input Power 100 mW (20 dBm)
Water Resistant Rating (Outdoor Models) IEC 60529 IPX7
Operating Mode Bi-directional, half-duplex Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode
Operating Temperature -40°C to 50°C
(-40°F to 122°F)
Current Draw (G and GI Models) 0.80A Peak Tx and 0.06A Peak Rx
Current Draw (GX and GXI Models) 1.25A Peak Tx and 0.14A Peak Rx
Supply Voltage (G and GI Models) 12VDC -/+1V
Supply Voltage (GX and GXI Models) 12VDC -0.5V / +1V