Protector de rayos 0-3 GHz N Macho-N Hembra

 

 

20.75€

Cantidad:

Codigo del Producto:091005

 

N-Male to N-Female Bulkhead 0-3 GHz Lightning Protector
Model: AL-NMNFB
Applications and Features
Applications: IEEE 802.11b and 802.11g Wireless LAN applications
ISM
MMDS
Cellular
PCS applications

Features:

Reliable Performance from DC ~ 3 GHz
Competitively Priced
High Quality Construction
Easily Replaced Gas Tube Element
Multi-Strike Capability
Bi-Directional Protection
Protector will pass DC
Mounting Bracket Included
802.11b and 802.11g Compatible
RoHS Compliant

Description
The Altelicon™ Lightning Protector Model AL-NMNFB is a gas discharge tube suppressor featuring wide-band operation up to 3 GHz. This unit features a N-Male to N-Female Bulkhead connector with a rubber O-ring seal for mounting through an enclosure wall or with the included aluminum mounting bracket.

Due to its low cost and superior RF performance, this unit is ideal for IEEE 802.11b and 802.11g Wireless LAN applications, as well as ISM, MMDS, Cellular, and PCS applications. Since this protector will pass DC, it is suitable for applications where DC is carried through the coax cable, such as remote amplifiers and LNAs.

Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.

The unit's replaceable gas tube element, multi-strike capability, and fast response time make it suitable for a wide range of applications. A ground lug and terminal are supplied directly on the lightning protector housing, which provides superior grounding.

N-Male to N-Female Bulkhead 0-3 GHz Lightning Protector
Model: AL-NMNFB (HGLN-04)
Applications and Features
Applications: IEEE 802.11b and 802.11g Wireless LAN applications
ISM
MMDS
Cellular
PCS applications


Features:

Reliable Performance from DC ~ 3 GHz
Competitively Priced
High Quality Construction
Easily Replaced Gas Tube Element
Multi-Strike Capability
Bi-Directional Protection
Protector will pass DC
Mounting Bracket Included
802.11b and 802.11g Compatible
RoHS Compliant



Larger Image
Order
These specially marked prices are subject to availability.

Select the standard 90V model for Wireless LAN and other applications with less than 10W output power. See below for other applications.

Standard 90V Lightning Protector (AL-NMNFB-9)
Quantity 1-9 Quantity 10-49 Quantity 50+
$19.99 each $18.99 each $16.99 each

Special Application Breakdown Voltages Available


Breakdown
Voltage Click here for assistance with gas tube (breakdown voltage) selection.
230V Lightning Protector (AL-NMNFB-2)
Quantity 1-9 Quantity 10-49 Quantity 50+
$25.99 each $23.99 each $21.99 each

350V Lightning Protector (AL-NMNFB-3)
Quantity 1-9 Quantity 10-49 Quantity 50+
$25.99 each $23.99 each $21.99 each

600V Lightning Protector (AL-NMNFB-6)
Quantity 1-9 Quantity 10-49 Quantity 50+
$25.99 each $23.99 each $21.99 each

for replacement gas tubes.

Downloads
View Protector Drawing
View Bracket Drawing

Description
The Altelicon™ Lightning Protector Model AL-NMNFB is a gas discharge tube suppressor featuring wide-band operation up to 3 GHz. This unit features a N-Male to N-Female Bulkhead connector with a rubber O-ring seal for mounting through an enclosure wall or with the included aluminum mounting bracket.

Due to its low cost and superior RF performance, this unit is ideal for IEEE 802.11b and 802.11g Wireless LAN applications, as well as ISM, MMDS, Cellular, and PCS applications. Since this protector will pass DC, it is suitable for applications where DC is carried through the coax cable, such as remote amplifiers and LNAs.

Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.

The unit's replaceable gas tube element, multi-strike capability, and fast response time make it suitable for a wide range of applications. A ground lug and terminal are supplied directly on the lightning protector housing, which provides superior grounding.



Specifications
Electrical Specifications
Frequency Range 0 - 3 GHz
Protector Complies With IEC / IEEE Standard
VSWR 1:1.3 Max (0 - 3 GHz)
Insertion Loss 0.4 dB Max (0 - 3GHz)
Impedance 50 Ohm
Standard Gas Tube Element:
DC Breakdown Voltage Indicated 90 V ± 20%
Available Gas Tube Elements:
DC Breakdown Voltages Indicated 230 V ± 20%
350 V ± 20%
600 V ± 20%
Gas Tube Impulse Breakdown Voltage 1000 V ± 20%
Gas Tube Insulation Resistance 10,000 MO
Maximum Withstand Current 5 KA
RF Power Rating
Model
Suffix Voltage
Rating DC ~ 30MHz 30–500MHz 500MHz–3GHz
PEP1 CW2 PEP1 CW2 PEP1 CW2
-9 90 Volt 110W 55W 65W 32W 20W 10W
-2 230 Volt 280W 140W 110W 55W 40W 20W
-3 350 Volt 650W 325W 260W 130W 100W 50W
-6 600 Volt 2KW 1KW 800W 400W 320W 160W

Mechanical Specifications
Connectors Comply With MIL-C-71A, 39012 Standard
Connectors Types N-Male to N-Female Bulkhead
Connector Body Material Nickel Plated Brass
Body Material Aluminum
Pin Material Gold Plated Brass
O-Ring Material Rubber
Bracket Material Aluminum
Ground Lug 10 AWG Max.
Max. Panel Thickness (Bulkhead Connector) 0.312" (7.93 mm) Thick
Dimensions (L x H x W) 3.3 in x 1.6 in x 0.8 in
(84 mm x 40 mm x 20 mm)
Weight 3.17oz
(89.8g)
Environmental Specifications
Temperature Range -67°F to 185°F
(-55°C to +85°C)
Dust and Waterproof Rating IEC 529 / IP65
Moisture Resistance MIL-STD-202 Method 106D
Salt Fog MIL-STD-202 101D/B
Temperature Shock MIL-STD-202 107D/A-1
Vibration MIL-STD-202 Method 204D/B
Shock MIL-STD-202 Method 213B/A
RoHS Compliant Yes
Notes:
1 - Peak Envelope Power (PEP): The average power supplied to the antenna transmission line by a transmitter during one radio frequency cycle at the crest of the modulation envelope taken under normal operating conditions.

2 - Continuous Wave (CW): A wave of constant amplitude and constant frequency.